|
LENGTH: Length is before weld. Stud
diameters (D) 1/2" and below will be approximately
1/8" shorter after welding. 5/8" and
larger will be approximately 3/16" shorter
after welding.
MATERIAL: Low carbon steel ASTM: A-496
|
|
|
Mechanical Property Requirements
|
| |
Type C3
|
| Tensile Strength |
80,000 psi
min
(552 MPa)
|
|
Yield Strength
(0.2% offset
(0.5% offset
|
___
70,000 psi min
(485 MPa)
|
Elongation
(% in 2-in.) |
__
|
| Reduction
of Area |
__
|
| 3
|
Type C studs
are cold-worked deformed steel bars manufactured
in accordance with specification ASTM A496
having a minimal diameter equivalent to
the diameter of a plain wire having the
same weight per foot as the deformed wire.
ASTM A496 specifies a maximum diameter of
0.628 in. (16 mm) maximum. Any bar supplied
above that diameter must have the same physical
characteristics regarding deformations as
required by ASTM A496. |
|
|
