Deformed Bar Anchors DBA 34 42316

Size: 3/4 x 42-3/16

Deformed Bar Anchors are used for deep embedment anchors. They are designed for weld and bearing plates in concrete connections.

Length: Length is before weld. Stud diameters (D) 1/2″ and below will be approximately 1/8″ shorter after welding. 5/8″ and larger will be approximately 3/16″ shorter after welding.

Material: Low carbon steel ASTM: A1064-18 (ASTM A496 has been withdrawn)

Made to order lengths are available upon request.

We can bend the product to your specification upon request.

Stud Part Number: DBA 34 42316

AKA Part Numbers: DBA, D2L, DA, D2L Deformed Bar Anchors

ESR-2823

  • Diameter: 3/4
  • Length: 42-3/16
  • Pcs. Per Box: 40
  • Boxes per Pallet: 6
  • 1,000 Pcs. Weight: 5,125 lbs.
  • Box Weight: 205 lbs.
  • Pcs. Per Pallet: 240
  • Pallet Weight: 1,230 lbs.
Category:

Description

Deformed Bar Anchors DBA (3/4 x 42-3/16″)

Our Deformed Bar Anchors are composed of low-carbon steel (ASTM A1064-18, ASTM A496 has been withdrawn).

When Arc Stud Welding with the proper equipment and setup, you obtain a full fusion weld that becomes stronger than the stud itself.

These general purpose deformed bar anchors are designed for weld and bearing plates in concrete connections. They can be welded to a flat surface or to the inside or outside of an angle. Some of the advantages of deformed bar anchors are:

  • Grip: Deformed surface of DBAs creates a mechanical bond with concrete, preventing slippage and separation
  • Load Support: Designed to increase holding power in concrete and maximize material strength
  • Installation and welding process is quick and simple

Structural steel fabrication commonly uses arc studs. A process called arc stud welding allows a metal fastener to be welded to a parent metal through a fusion weld. A “ferrule” captures and retains the weld’s heat. The process creates molten metal that cools the weld site. The weld produced is stronger than the stud itself. Welders can use drawn arc stud welding with dissimilar metals such as mild and stainless steel, as well as aluminum.

Stud Part Number: DBA

AKA Part Numbers: DBA, D2L, DA, D2L Deformed Bar Anchors

Our Deformed Bar Anchors meet requirements of the following:

  • AWS D1.1 Structural Welding Code – Steel, Type C
  • ASTM A1064 (Previously A496) Steel Wire, Deformed, For Concrete Reinforcement
  • International Building Code Section 19 See ICC-ES Evaluation Report ESR-2907

Not What You’re Looking For?

View our full selection of capacitor discharge studs and arc studs, click here. Also, view our selection of arc stud welders here.

Have Questions?

For more information on this product, call our office at 800-252-1919 or email us at Info@studweldprod.com and we will get back to you shortly!

Follow Us on Social Media!

Your #1 Stud! on Instagram and Facebook.  Also, check out our YouTube channel here.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.