LENGTH: Length is before weld. Stud diameters (D) 1/2″ and below will be approximately 1/8″ shorter after welding. 5/8″ and larger will be approximately 3/16″ shorter after welding.
MATERIAL: Low carbon steel ASTM: A1064-18 (ASTM A496 has been withdrawn)
We can bend the product to your specification upon request.
Print Dbar Spec Sheet ESR-2823 DBA LA City Approvals_DBAR
| Mechanical Property Requirements | |
|---|---|
| Type C3 | |
| Tensile Strength | 80,000 psi min (552 MPa) |
| Yield Strength | |
| (0.2% offset) | ----- |
| (0.5% offset) | 70,000 psi min (485 MPa) |
| Elongation (% in 2-in.) | ----- |
| Reduction of Area | ----- |
| 3Type C studs are cold-worked deformed steel bars manufactured in accordance with specification ASTM A1064-18(ASTM A496 has been withdrawn) having a minimal diameter equivalent to the diameter of a plain wire having the same weight per foot as the deformed wire. ASTM A1064-18(ASTM A496 has been withdrawn) specifies a maximum diameter of 0.628 in. (16 mm) maximum. Any bar supplied above that diameter must have the same physical characteristics regarding deformations as required by ASTM A1064-18(ASTM A496 has been withdrawn) | |
Available Stock Sizes
| 3/8″ | 1/2″ | 5/8″ | 3/4″ |
| DBA 38 1018 | DBA 12 1018 | DBA 58 12316 | DBA 34 12316 |
| DBA 38 1218 | DBA 12 1218 | DBA 58 18316 | DBA 34 18316 |
| DBA 38 1818 | DBA 12 1818 | DBA 58 24316 | DBA 34 24316 |
| DBA 38 2418 | DBA 12 2418 | DBA 58 30316 | DBA 34 30316 |
| DBA 38 3018 | DBA 12 3018 | DBA 58 36316 | DBA 34 36316 |
| DBA 38 3618 | DBA 12 3618 | DBA 58 42316 | DBA 34 42316 |
| DBA 38 4818 | DBA 12 4218 | DBA 58 48316 | DBA 34 48316 |
| DBA 38 60316 | DBA 12 4818 | DBA 58 60316 | DBA 34 60316 |
| DBA 12 6018 | DBA 34 72316 | ||
| DBA 12 7218 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.